Expert Answers about Chevrolet Wheel Well Liner

• Will Husky Liners Wheel Well Guards Fit With 5th Wheel Hitch Installed?
• I contacted the vendor regarding the Husky Liners Custom Rear Wheel Well Guards # HL79031. This will fit your 2016 GMC Sierra 2500HD nicely as long as it doesn't have a bracket on the side of the frame in the wheel well area (see photo of a setup that has this bracket). If you do have a 5th wheel bracket on the side of the frame then you can technically still use this liner, but you will likely need to cut/notch out a section of the wheel well liner. I attached a short demonstration video...
  view full answer...


• Will the Reese Custom Install Kit Fit on a 2013 Chevy 2500HD with Pre-Installed Wheel Well Liners
• You can install the Reese Custom Install Kit, # RP56001-53, with the outboard brackets on your 2013 Chevrolet 2500 HD with the wheel well liners. In fact, our installers just installed a gooseneck hitch with outboard frame brackets on a 2013 Chevy 3500HD with the wheel well liners yesterday and had no problem. You may want to temporarily remove the wheel well liners to make the installation easier, but once the brackets and base rails are installed, you can re-install the wheel well liners. The...
  view full answer...


• Will Firestone Air Springs Work on 2016 Ford F-150 XLT 4WD With Wheel Well Liners
• We have gotten this question before and Firestone has told us that even though the Firestone Ride-Rite Air Helper Springs # F2582 have not been tested specifically with wheel well liners, they have not heard of any issues regarding their installation or use on trucks that have liners. I also took a look at the many reviews we have and did not come across any customers who mentioned liners being a problem. If you do find they interfere you can do what it looks like the customer in the accompanying...
  view full answer...


• Will Firestone Ride-Rite Air Bags # F2525 Fit with Ford Factory Wheel Well Liners
• I spoke with my contact at Firestone and he said while Firestone did not specifically test the Firestone Ride-Rite Air Helper Springs # F2525 on a 2013 Ford F-150 with factory wheel well liners, he has not heard of any problems with wheel well liners interfering with the Air Helper Springs.
  view full answer...


• Wheel Well Liners for a 2012 Ford F-250/F-350 with Factory Prep Package
• Yes, the Husky Liners Custom Rear Wheel Well Guards part # HL79111 will work on your 2012 Ford F-250/F-350 (Single Rear Wheel Only) with the factory gooseneck hitch. The hitch ball release for the factory gooseneck hitch is on the ball so there is not a lever in the wheel well like most aftermarket gooseneck trailer hitches.
  view full answer...


• Husky Wheel Well Liners For 2020 Chevrolet Silverado 1500
• The correct Husky Liners Custom Rear Wheel Well Guards that are confirmed to fit your 2020 Chevrolet Silverado 1500 are # HL79061. The Husky # HL79121 you referenced is for a Ford F-150.
  view full answer...


• Will Factory Installed Wheel Well Liners Need Altering for Firestone Air Springs on 2016 Ford F-350
• The Firestone Ride-Rite Air Helper Springs - Double Convoluted - Rear Axle # F2597 are a great option for your 2016 Ford F-350. The factory installed wheel well liners will need to be either worked around or removed for installation but will not need any altering of any kind. It is easier to install if you remove them but you can work around them it is just more difficult according to my contact at Firestone. On one side you will remove a bolt already present and replace it. The other...
  view full answer...


• Mud Flaps For 2020 Ford F-150 With Rear Wheel Well Liners
• As long as the liner is on the inside of the fender and does not come to the outside then the WeatherTech Mud Flaps - Easy-Install, No-Drill, Digital Fit - Rear Pair Item # WT120050 are going to fit your 2020 Ford F-150. Because the mud flap has a spin tab that locks to the inner lip of the fender, if the liner comes outside of that lip then the only way to get them to fit would be to make a small slice so the spin tab can lock to the lip of the fender.
  view full answer...


• Turnoverball Gooseneck Hitch Compatibility with Plastic Factory Wheel Well Liners on 2003 Ram 2500
• For your 2003 Dodge Ram 2500 long bed, the B&W Turnoverball Underbed Gooseneck Trailer Hitch w/ Custom Installation Kit - 30,000 lbs # BWGNRK1313 is the custom fit. It will require drilling or trimming your factory wheel well liners for the ball release. I recommend the Extended Latch Pin Handle for B&W Turnoverball Gooseneck Trailer Hitch - 17" # BWGNXA1800 to ensure the fit and then only a small hole in the liner would be required.
  view full answer...


• Wheel Liners Compatible With Dual Rear Wheels of 2006 Chevy Express Van
• The Namsco Wheel Liners - 16" and 16-1/2", 8-Lug Dually - 4 HH - Front/Rear # NA7160U0J are a confirmed fit for your 2006 Chevy Express Van with dual rear wheels. The liners are made of stainless steel with a mirror finish. I've attached a video of this product to help you with the installation. The liners will fit either 16 inch or 16-1/2 inch wheels as they are liners and not held on by the current lugs but rather with jam nuts included and have a wide flange for that capability. ...
  view full answer...


• Can Curt 5th Wheel/Gooseneck In-Bed Wiring Harness be Installed in a Truck with Drop-In Bed Liner
• Yes, you can use the Curt 5th wheel and gooseneck in-bed wiring harness # C56070 in a truck with a drop-in bed liner. You will need to cut a hole through the bed liner as well as the bed for installation. If you want you can make the bed liner hole bigger or just mount the 7-Way using the included hardware through the bed liner and bed. I have linked a video showing an example installation for you.
  view full answer...


• Will Custom-Fit Truck Bed Mat Require Trimming to Fit Over Drop-In Bed Liner
• You will need to trim the DeeZee Custom-Fit Truck Bed Mat a bit to get it to fit over the drop-in liner on your 2018 Ford F-150. These mats are a custom-fit for trucks with bare or spray-on liners and what a drop-in liner does is change the effective dimensions of your bed. The DeeZee Custom-Fit Truck Bed Mats available for your 2018 Ford F-150 are # DZ87005 (for a 5-1/2 foot bed), # DZ87006 (for a 6-1/2 foot bed) or # DZ87007 (for an 8 foot bed). As you mentioned, the BedRugs # BMQ15SCD...
  view full answer...


• Which Husky Liners Mud Flaps for the 2011 Chevrolet Equinox V6 LTZ AWD
• Husky Liners Mud Flaps for the Chevrolet Equinox, part # HL56861, fit the front wheel wells of the 2011 Equinox whether or not it is equipped with factory add-on fender flares. For your rear wheel wells you can use HuskyLiners part # HL57861. These rear mud guards also will fit on the vehicle whether or not it has the factory fender flares. Both front and rear kits include all required mounting hardware. Front flaps install with three fasteners each and rear flaps with two fasteners each.
  view full answer...


• Will Stromberg Carlson 5th Wheel Tailgate VGM-99-100 Fit a 2004 Chevy Silverado with Bed Liner
• A composite truck bed would be a bed made of a glass fiber material instead of steel. As long as your bed liner is installed over a steel truck bed, the # VGM-99-100 fifth-wheel tailgate would work well on your truck. If you have the bed liner over a composite bed, you would not be able to install this tailgate on your 2004 Chevrolet Silverado.
  view full answer...


• Will the Husky Liners Mud Flaps Fit a 2018 Ford F-150 with Running Boards
• I spoke to my contact at Husky Liner and they informed me that the Husky Liners Custom Molded Mud Flaps part # HL58441-HL59441 will fit your 2018 Ford F-150 as long as the running boards you have were equipped from the factory and are not aftermarket. If you have aftermarket running boards then I would need to see a photo of the clearance between the wheel well and running board to determine fitment. If you are referring to the WeatherTech Mud Flaps part # WT110050-120050 then you would...
  view full answer...


• Will Fifth Wheel Hitch And Installation kit Work With Spray-In Bed-Liner On 2016 Ford F-150
• The Reese Quick-Install Custom Base Rails and Outboard Installation Kit, part # RP56034-53 will work with the spray-in bed liner on your 2016 F-150. The only restriction listed are the plastic bed-liners as they can move so they have to be notched for the rails to fit properly. The installation time is cut in half with this kit versus using a universal installation kit. The Curt E16 5th Wheel Trailer Hitch w/ S20 Slider # C95DR will work great with your pickup as well. If you need a wiring...
  view full answer...


• Would the Husky Liners Custom Rear Wheel Well Guards # HL79101 Fit a Truck with Mudflaps
• Based on how the Weathertech mud flaps you have on your 2012 Ford F150 install they would be compatible with the Husky Liners Custom Rear Wheel Well Guards # HL79101 as it will fit behind the mudflap and quarter panel, whereas your mudflap mounts in front of the quarter panel. At worst you would have to trim the # HL79101 to get it to fit perfectly, but that would not be difficult at all. In the install video I attached for the # HL79101 our installer had to do some modifications as well.
  view full answer...


• Cargo Slide For A 2014 Ram 1500 Long Bed
• For your 2014 Ram 1500 I recommend the CargoGlide 1500XL Sliding Tray for Trucks - Heavy Duty - 1,500 lbs - Steel Frame - 8" Rail Item # CG1500XL-9548. If you have a spray in bed liner the instillation will be normal. If you have a drop in bed liner the liner will either have to be removed or the floor section would have to be trimmed to accommodate the base rails of the cargo slide. Keep in mind a drop in bed liner is not an exact fit to the bed so it could effect how the tray fits in...
  view full answer...


• Will The B&W OEM Companion Fit In The Pucks Of A Ford F-350 With Bed Liner
• Yes, the B&W Companion OEM 5th-Wheel Hitch for Ford Super Duty Prep Package - Dual Jaw - 20,000lbs # BWRVK3300 as well as the higher capacity model # BWRVK3305 will fit in your 2022 Ford F-350 Super Duty's puck system even though you have a bed liner. You may just need to trim the bed liner around the pucks to get the feet of the hitch to fully drop into the pucks.
  view full answer...


• Will The B&W Companion Fit A 2022 Ford F-350 With Puck System And Bed Liner
• Yes, the B&W Companion OEM 5th Wheel Hitch for Ford Super Duty Prep Package - Dual Jaw - 25,000lbs # BWRVK3305 as well as the lower capacity # BWRVK3300 will be compatible with your 2022 Ford F-350's puck system and bed liner. You may just have to trim the bed liner back a bit around each puck to allow for enough room for the legs of the hitch to fully sit in the pucks (depending on how thick your bed liner is). If your bed liner is removable I recommend taking it out before trimming...
  view full answer...